主页 关于我们 最新公告 往期目录 录用通知 精彩阅读 原创作品选编 投稿指南 汇款方式 联系我们
最新公告
《价值工程》现安排24年5月版面!01-22
2023年中国科技核心期刊目录09-21
《价值工程》投稿咨询电话!08-22
《价值工程》栏目设置07-22
《价值工程》文章细节要求:05-15
《价值工程》作者简介格式07-19

版权信息

版权信息:
杂志名称:《价值工程》
主管单位:河北省科学技术协会
主办单位:河北省技术经济管理现代化研究会
国际刊号:1006-4311
国内刊号:13-1085/N
邮发代号:18-2
责任编辑:张崇
咨询电话:18132119945
投稿邮箱:vezzs02@163.com

原创作品选编
超精密数控机床误差补偿技术及系统设计搭建

Error Compensation Technology and System Design and Construction of Ultra-precision CNC Machine Tools
彭鸣 PENG Ming
(上海筑东机电工程技术服务有限公司,上海 201206)
(Shanghai Zhudong Mechanical & Electrical Engineering Technical Service Co.,Ltd.,Shanghai 201206,China)

摘要: 使用超精密数控机床加工零件时,应用误差补偿技术能够显著提高加工精度。本文首先概述了数控机床的误差补偿原理和误差补偿流程,在此基础上通过仿真实验,证明了使用误差补偿技术后,数控机床的实际加工轨迹更加趋近于理想轨迹,进一步提高了加工精度。随后设计了基于UMAC控制器的超精密数控机床控制系统,并进行了PID参数调试,确保机床运动特性最佳。最后验证了系统基本功能,确保数控系统的点动功能、状态监视功能等均可以正常实现。
Abstract: When machining parts with ultra-precision CNC machine tools, the application of error compensation technology can significantly improve the machining accuracy. This paper first outlines the error compensation principle and error compensation process of CNC machine tools. On this basis, it is proved by simulation experiments that after using error compensation technology, the actual machining trajectory of CNC machine tools is closer to the ideal trajectory, which further improves the machining accuracy. Subsequently, an ultra-precision CNC machine tool control system based on UMAC controller was designed, and PID parameters were debugged to ensure the best kinematic characteristics of the machine tool. Finally, the basic functions of the system are verified to ensure that the jog function and state monitoring function of the CNC system can be realized normally.
关键词: 超精密数控机床;误差补偿技术;UMAC控制器;状态监视
Key words: ultra-precision CNC machine tool;error compensation technology;UMAC controller;state monitoring
中图分类号:TG659      文献标识码:A      文章编号:1006-4311(2022)16-042-03     



      DOI:10.3969/j.issn.1006-4311.2022.16.014.

     文章出处:彭鸣. 超精密数控机床误差补偿技术及系统设计搭建[J]. 价值工程,2022,41(16):42-44.

社址:石家庄市槐安西路88号卓达玫瑰园物业楼 050091    电话:18132119945    微信:15132496582

投稿邮箱:vezzs02@163.com

价值工程杂志社

    点击这里给我发消息      点击这里给我发消息

备案号:冀ICP备19020820号-1


我要啦免费统计
点击这里给我发消息
点击这里给我发消息
24小时热线: 18132119945