Research on Forming Technology of Special-shaped Composite Panel Components Reinforced with Dense Rib
王学春 WANG Xue-chun;刘梦辉 LIU Meng-hui;张旭艳 ZHANG Xu-yan;
党晓丽 DANG Xiao-li;郭勃睿 GUO Bo-rui
(中航西安飞机工业集团股份有限公司,西安 710089)
(AVIC Xi'an Aircraft Industry Group Co.,Ltd.,Xi'an 710089,China)
摘要:针对复合材料加筋壁板类结构组件在大型航空装备中应用愈加广泛,结构愈加复杂的趋势,本文以某型飞机的典型机副翼上壁板作为对象,对密肋加强的异型复合材料壁板组件成型工艺技术、工艺装备、质量检测等进行实践探究,进一步提高复合材料工程化应用技术水平。
Abstract: In view of the trend that composite reinforced wall panel structural components are more widely used in large aviation equipment and the structure is more complex The material siding component forming process technology, process equipment, quality inspection, etc. are practically explored to further improve the engineering application technology level of composite materials.
关键词:密肋加强;异型加筋壁板;成型工艺;工艺装备
Key words: dense rib reinforcement;special-shaped reinforced wall panel;forming process;process equipment
中图分类号:V214.8 文献标识码:A 文章编号:1006-4311(2022)19-094-03
DOI:10.3969/j.issn.1006-4311.2022.19.031.
文章出处:王学春,刘梦辉,张旭艳,等. 密肋加强的异型复合材料壁板组件成型技术研究[J]. 价值工程,2022,41(19):94-96.
|