Analysis and Optimization of Spent Resin Dosing Process
辛克① XIN Ke；白龙② BAI Long
（①中国核电工程有限公司，北京 100840；②中国核电工程有限公司华东分公司，嘉兴 314300）
（①China Nuclear Power Engineering Co.，Ltd.，Beijing 100840，China；
②East China Branch of China Nuclear Power Engineering Co.，Ltd.，Jiaxing 314300，China）
摘要： 某三代核电厂核电废树脂处理系统主要用于从核岛接收放射性废树脂，并在厂址放射性废物处理设施对废树脂进行计量、干燥处理。本文结合调试经验，对废树脂计量期间遇到的问题进行分析，对废树脂的计量工艺进行改进，优化系统。为该核电及后续同类项目的废树脂处理系统的运行及调试提供借鉴和参考。
Abstract: The third generation nuclear plant spent resin treatment process consists of the spent resin transfer from NI, dosing and drying for spent resin in spent resin processing system. This article analyzes and optimizes the dosing process with the experience during commissioning so that the system could be available. This paper can provide reference for the operation and commissioning of spent resin processing system and for other similar project.
关键词： 三代核电；废树脂处理；分析；改进
Key words: the third generation nuclear plant；spent resin process；analysis；optimize
中图分类号：TM623 文献标识码：A 文章编号：1006-4311（2022）21-091-03
DOI:10.3969/j.issn.1006-4311.2022.21.028.
文章出处：辛克,白龙. 废树脂处理计量工艺分析与改进[J]. 价值工程,2022,41(21):91-93.
|
