Study on Influence Factors of Welding Quality and Process Improvement of Continuous Annealing Unit
姚建华① YAO Jian-hua;李思全LI Si-quan
①合肥通用职业技术学院,合肥230031 ;
②武钢集团有限公司,武汉430080
①Hefei Institute of General Professional 'Technology , Hefei 230031 , China;
②Wugang Groupe Co.,Ltd.,Wuhan 430080,China
摘要:针对冷轧带钢连续生产中出现的焊缝质量不高、重焊率高以及断带等问题,在分析影响焊接质量各要素的基础上,确定连退机组本体设备工艺特点、带钢质量以及焊缝质量检测方法是主要影响因素,通过清理关键部件、调整设备间隙、增加辅助后加热设备.处理设备故障报警,控制带材质量以及优化焊缝检测方法等措施,并制订了含Р高强钢的焊接工艺调整规范以及焊接折弯(冲击)试验规范,提高了成品带钢的焊接质量和机组生产效益。
Abstract: In view of the problems of low weldling quality, high re-weldling rate and broken strip during continmuous prodluction of cold-rolling strip steel, based on the analysis of various factors affecting the weldling quality, it is determined that the main influencing factors arethe technology characteristics of the main equipment of the contimuous annealing unit, strip steel quality and weld quality inspectionmethod. By cleaning up key components, adjusting equipment clearance, adding auxiliary post-heating equipment, handling equipment faultalarm, controlling strip quality and optimizing welling seam detection method, etc., the weldling process specification and bending (impact)test criterion of P-containing high strength steel have been worked out to improve the welling quality of the finished strip steel and theproduction efficiency of the unit.
关键词:连退机组;焊接质量;设备调整;工艺规范
Key words: continuous annealing unit; welding quality; equipment adjustment; process specification
价值工程-文章出处:姚建华,李思全.连退机组焊接质量影响因素研究与工艺改进[J].价值工程,2023,42(22):66-68. |